Quick Cut | Cutting Compound | 500ml

Quick Cut | Cutting Compound | 500ml

$49.00

Pricing Excludes GST and Freight Charges*

Image CODE NAME QTY PRICE STOCK
RT-1295
$49.00

In stock

In Stock

OVERVIEW:
· #1 Quick Cut – is designed for priming vehicles before the painting process begins.
· Product Name: #1 – Quick Cut
· Classification: Paste Type, for Vehicles ·
· Chemical Content: Water, aio2, paraffin oil, naphtha
· MADE IN KOREA

FEATURES:
· #1 Quick Cut is an advanced polishing paste featuring an innovative formula designed to remove
deep scratches from exterior automotive surfaces.
· The intelligent abrasive grain, which is ten times smaller than conventional abrasives,
ensures an extreme level of cut and degree of gloss.
· Our proprietary technology ensures high polishing performance and low dust levels,
significantly reducing surface working time. It can be used for all types of factory and secondary
paints. In addition to its excellent cutting power, #1 Quick Cut leaves an aesthetically
pleasing, smooth finish.
· The alumina-based formula is free of silicones, fillers, and waxes, which is beneficial for
removing waste/dust particles generated during work.
· The delightful baby powder scent will make even the most extended working hours pleasant.

OVERVIEW:
· #1 Quick Cut – is designed for priming vehicles before the painting process begins.
· Product Name: #1 – Quick Cut
· Classification: Paste Type, for Vehicles       ·
· Chemical Content: Water, aio2, paraffin oil, naphtha
· MADE IN KOREA
FEATURES:
· #1 Quick Cut is an advanced polishing paste featuring an innovative formula designed to remove
deep scratches from exterior automotive surfaces.
· The intelligent abrasive grain, which is ten times smaller than conventional abrasives,
ensures an extreme level of cut and degree of gloss.
· Our proprietary technology ensures high polishing performance and low dust levels,
significantly reducing surface working time. It can be used for all types of factory and secondary
paints. In addition to its excellent cutting power, #1 Quick Cut leaves an aesthetically
pleasing, smooth finish.
· The alumina-based formula is free of silicones, fillers, and waxes, which is beneficial for
removing waste/dust particles generated during work.
· The delightful baby powder scent will make even the most extended working hours pleasant.
ADVANTAGES:
Suitable for dual-action and rotary users / Strong cutting compounds completely remove deep
scratches/ Coarse-grained polishing paste / Low dust levels / Free of silicones, heavy solvents,
waxes, and fillers / 4-micron mineral size.
We recommend 1200 to 1500 RPM for single and 3 to 5 for dual-action users.
DIRECTIONS:
 1. Use a clean, dry pad and prime with a very thin worked-in layer of Quick Cut, then add

3-4 pea-sized drops of Quick Cut.
2. Spread the product across a section.
3. Increase the applicator to high speed and low pressure.
4. Use MINIMAL pressure for the first 2-3 passes, increasing pressure with each pass.
5. Finish with heavier pressure.
6. When the scratches are gone or the polish has been worked through, wipe clean with a
microfibre towel.
7. Clean the pad.
8. Move to the next section, apply 2 – 4 pea-size drops to the pad, and repeat steps 2-7.

Suitable for dual-action and rotary users / Strong cutting compounds completely remove deep
scratches/ Coarse-grained polishing paste / Low dust levels / Free of silicones, heavy solvents,
waxes, and fillers / 4-micron mineral size.
We recommend 1200 to 1500 RPM for single and 3 to 5 for dual-action users.

DIRECTIONS:
1. Use a clean, dry pad and prime with a very thin worked-in layer of Quick Cut, then add
3-4 pea-sized drops of Quick Cut.
2. Spread the product across a section.
3. Increase the applicator to high speed and low pressure.
4. Use MINIMAL pressure for the first 2-3 passes, increasing pressure with each pass.
5. Finish with heavier pressure.
6. When the scratches are gone or the polish has been worked through, wipe clean with a
microfibre towel.
7. Clean the pad.
8. Move to the next section, apply 2 – 4 pea-size drops to the pad, and repeat steps 2-7.

Need Help? Contact Us Leave Feedback

Categories: , ,